Delivery & installation included
The Classic is a simple, traditional garden shed that is hand-built to a high standard in our Norfolk based factory.
It comes in seven standard sizes, in either a pent or apex roof design, and there are six paint colours or a stain to choose to finish it off.
For a more bespoke service, please see our Superior Shed range, or to price your ideal Classic Shed, please click on the Create my Shed tab below.
Our Classic Sheds are available in 7 sizes:
1.2 x 1.8m (4 x 6ft)
1.5 x 2.1m (5 x 7ft)
1.8 x 1.8m (6 x 6ft)
1.8 x 2.4m (6 x 8ft)
1.8 x 3.0m (6 x 10ft)
2.4 x 2.4m (8 x 8ft)
2.4 x 3.0m (8 x 10ft)
Choose either a pent or apex roofed design to suit your space and personal requirements. You can then decide where you would like your doors and windows, and any extra options, such as paint or guttering.
Please note: If you would like a door or doors in the side of a shed with an apex roof, please see our Superior Shed range, which has a taller eave height to allow for this configuration.
Our ledged and braced doors are all made in-house by our joiners, ensuring the high quality that we expect is met. With our Classic range you can choose from either a single or double door set, depending on your needs.
The windows are also made in-house by our joiners: they measure 610 x 610mm (2’ x 2’), set in a joinery-made window frame, and are finished with 4mm toughened safety glass. You can choose to have opening windows, if you wish, or no windows at all, if that is your preference.
The Classic single door is ledged and braced, and it measures 760 x 1700mm opening.
You can opt for a double door set if you need to move large items in and out of your shed with ease. A double door set measures 1520 x 1700mm opening.
If you're planning on using your shed as a workshop, choosing to have opening windows will allow fresh air inside as you work.
Our Classic Sheds come treated with either a light oak wood preservative, or a choice of six different paint colours.
The light oak preservative protects the timber from fungi and woodworm, and gives a natural looking sheen.
The paint colours are Seagrass, Moss, Cotton, Stone, Smoke or Coal. Our Classic paint range will give an opaque coverage, adding a splash of colour to your shed.
Seagrass | Moss
Cotton | Stone
Smoke | Coal
To make your new shed truly suited to your needs, you also have the choice of adding guttering and/or a workbench.
Add guttering to collect any water run-off from the roof and to stop the bottom boards from rotting prematurely, or add a workbench to aid with your DIY or hobby needs.
We add the guttering and a downpipe along both eaves of an apex roofed shed, and on a pent roofed shed we add the guttering and downpipe along the lowest side/eave of the roof.
Our workbenches are 900mm tall, and 600mm deep, and for a solid, sturdy finish, we use oak-faced plywood.
All our Classic Sheds require a level, solid base of the correct size with either:
The single most important part of installing a garden building is the base. Bases must be:
Concrete Base
This is our preference because of the durability and strength of concrete.
A concrete base supports your building in the best possible way, adding longevity, as well as creating a substantial distance between your building and surface water.
We can supply a 100mm deep reinforced concrete base ready for your building, laid by our professionals, in advance of your building being installed by us. The site must be clear and level within 100mm for us to do this.
The base should always be a minimum of 50mm out of the ground to prevent surface water or puddles affecting your building i.e. rotting it.
The size of the base needs to be the metric size of your building. For example, if you order an 8' x 10' building, the metric size is 2.4 x 3.0 metres and this should be the size of the base. If the base is not built to the metric size then you will see the base around the building, which can lead to water pooling.
 v2 small.jpg "1.5 x 2.1m Classic Shed in Smoke")
Timber Base
This is a cheaper alternative to our concrete bases, and it can be a good option if you don't want to have a permanent slab of concrete in your garden.
We only offer this solution with our Classic Sheds, as they aren't able to carry the same weight as a concrete base.
Timber Bearers
This is the cheapest option for supporting your new shed: timber bearers are essential for longevity in lifting the shed away from surface water and damp.
You don't need bearers as well as a base, but if you already have a base in place that is bigger than the building you intend to put on it, we recommend having timber bearers to lift the building up from any water that will sit on the base.
Please note: If you intend to fully or partially surround the building base with hard paving we strongly suggest the installation of a French drain between the paving and base to prevent rain bouncing off the hard surface and driving up under the building, which in turn could cause damp and rot. A French drain is a simple small trench, dug around your building and filled with aggregate that will allow surface water to drain away
Always get your garden building base laid by a professional, whether that is us, or a local builder you trust.
We constantly strive to ensure all our materials and techniques are the best that we can source and provide. We lead the market in producing exceptional quality timber buildings. Couple this with our personal and bespoke service and you will be totally delighted with your building.
Side Walls - ex 19 x 125mm shiplap cladding on ex 38 x 50mm planed framing, using high grade Scandinavian Redwood.
Doors - Our Classic Shed doors are ledged, braced and partially framed, and are hung with 3 @ 300mm zinc plated T-hinges and secured with a pad bolt. A single door measures 760 x 1700mm opening, and a double door sets measures 1520 x 1700mm opening.
Door Frame - ex 50 x 75mm planed.
Windows - 610mm square set in a joinery made window frame fitted with 4mm toughened safety glass. You can opt to have no windows. In the 4 x 6, 5 x 7 and 6 x 6 you get 1 window. In the other sizes you can have 2 windows.
Floor - ex 19 x 125mm tongue and groove floorboards set on ex 38 x 50mm tanalized planed floor joists.
Roof - ex 19 x 125mm tongue and groove matchboarding on ex 38 x 50mm planed framework covered with propane torched on heavy duty roofing felt.
Height - 1.70m to eave height.
Paint Options - Your building will come treated with either a light oak wood preservative, or a choice of six different paint colours. The light oak preservative protects the timber from fungi and woodworm, and gives a natural looking sheen. The paint colours are Seagrass, Moss, Cotton, Stone, Smoke or Coal. Our Classic paint range will give an opaque coverage, adding a splash of colour to your shed.
Our experienced and professional fitting team deliver and install all our buildings to anywhere on the UK mainland free of charge.
As our business is very much dependant on our reputation in providing an excellent product and service, our customer care is exceedingly important to us and you will find that we very much pride ourselves on this. From the design stage, right through to installation, providing the best possible service is our number one priority.
Each building we make is designed and built to order, which means that we can make the building in such a way that it will fit through restricted access areas and be installed exactly where the building is required; however, if you have any concerns about the access to your garden, please contact us and we will be able to advise you.
Please also note that our installation team requires a flat, solid and level base to install your building on. If you have any questions about this at all, we will be more than happy to help if you call us on
Take a look at our
National Trust Garden Shed range
